Kart-Graphic Protective film
KPF
A specialist protective film made to fit over your existing kart graphics.
KPF Protection Film Products
Premium kart protection film designed for maximum durability and performance
How to apply KPF
For the best results, KPF should be applied using the wet application method.
Thoroughly clean the existing graphics to remove all dirt and debris.
Degrease the surface using isopropyl alcohol (IPA) or another suitable degreaser to remove wax, silicone, polish and other contaminants.
Ensure the surface is completely clean and dry before application.
Lightly spray the surface and the adhesive side of the KPF with clean water.
Position the KPF onto the graphics.
Using a squeegee, work from the centre outwards to remove all trapped water and air.
Use a heat gun to gently seal all edges for maximum adhesion.
Allow sufficient curing time before use.
Graphic Application Kit
Graphic Application Kit Make fitting your kart graphics easier with the ONE Graphic Application Kit. Designed specifi...
